Style |
Dim A |
Dim B |
Slot shape Dim "C" |
Inner flange shape Dim " D and E " |
Rib Style |
PN Master |
Cable Dia. |
* Slot Width |
Round |
Square |
Rect |
Round |
Square |
Rect |
SurLoc |
Color |
Solid |
1467020 |
.060-.145 |
A-E |
.205 |
.205x.205 |
.205x.275 |
.330 |
.330x.330 |
.260x.330 |
.330x.260 |
1-11 |
SolidRib |
1467040 |
.146-.250 |
A-E |
.310 |
.310x.310 |
.310x.380 |
.438 |
.438x.438 |
.368x.438 |
.438x.368 |
1-11 |
UniFlex |
1467060 |
.251-.400 |
A-E |
.460 |
.460x.460 |
.460x.560 |
.632 |
.632x.632 |
.532x.632 |
.632x.532 |
1-11 |
MultiFlex |
1467080 |
.401-.550 |
A-E |
.610 |
.610x.610 |
.610x.710 |
.782 |
.782x.782 |
.682x.782 |
.782x.682 |
1-11 |
|
|
.551-.750 |
A-E |
.810 |
.810x.810 |
.810x.910 |
.984 |
.984x.984 |
.884x.984 |
.984x.884 |
1-11 |
|
* STANDARD SLOT WIDTHS ARE::
"A" . 047 "B" . 062 "C" .
078 "D" . 093 "E" .125 |
The Configuration Manager above shows how to create the part number for a semi-custom
grommet. For example if you need a Round grommet, with a UniFlex rib
style, for a cable
diameter of .123", and a panel thickness of .062, and square slot
shape to keep the grommet from turning, and an offset flange to
clear a structural rib in the case, and red in color, you would order
as follows: |
|
SR PN |
|
Cable Dia |
|
Slot Thick |
|
Slot Shape |
|
Inner Flange shape |
|
Color |
|
|
1467060 |
- |
.123 |
- |
B |
- |
.205x.205 |
- |
.260x.330 |
- |
2 |
|
|
|
|
|
|
|
|
|
|
|
|
Ordering Information:
ISC Engineering
provides for more than 1,500,000 combinations of semi-custom molded grommets,
either as discrete slip on units, or molded directly onto a cable. If you do
not fine what you are looking for, please contact us for further information
on custom order. PVC is the standard molding material, but we can also
provide Santoprene or Polyurethane |
Molded on strain
relief's or grommets * |
Discrete strain
relief's and grommets |
Line item charge per strain
relief type is $250.00 set-up charge and then pricing per piece as noted |
1-500 pcs $.97/pc |
1-500 pcs $.66/pc |
501-2500 pcs
$.72/pc |
501-2500 pcs
$.59/pc |
2501-5000 pcs
$.68/pc |
2501-5000 pcs
$.54/pc |
5001 pcs and up
$.63/pc |
5001 pcs and up
$.47/pc |
All custom configurations require a
minimum order of 2500pcs or a charge for tooling |
ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
Pricing for molded on grommets
assumes unterminated cables, and grommets located no more than 3 inches from
the end of the cable, and lengths no more than 10ft.. Due to the wide range
cable types and lengths, the above pricing is budgetary. Contact factory for
specific pricing |
There is no minimum order
quantity. Standard material is PVC,
UL 94V0 rated, C73 durometer. Other materials available
Line item set up
charge applies to all purchase order releases, and blanket orders are
possible to reduce the unit cost, with shipments over a maximum 12 month
period.
FOB is Duarte,CA.
Standard payment
terms are 2%10,NET30 days subject to credit approval
|
|